Osmokoll zoom
Osmokoll image 1
Osmokoll image 2
Osmokoll image 3

Osmokoll

Osmotic two-component type weatherstrip adhesive cement

A two-component, certified cementitious adhesive based on hydraulic binders free from harmful additions, with modifying and flexibilising resins, selected siliceous and calcareous sands, reactive fillers with high pozzolanic activity and cellulosic thickeners, perfect for the preparation of adhesive mixtures that are trowelable with high deformation and impermeability capacity. Ideal for bonding coatings of any kind, even with low absorption, on horizontal and vertical surfaces, both internal or external, including with low porosity (for example, coatings on indoor swimming pools).
Components
Two-components
Appearance
Liquid + Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 12004-1:2017
    Lines of belonging
    Linea prodotto Aqua
    Linea prodotto Building
    Linea prodotto Floor
    Thematic site
    Osmocem
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products
    Fields of application
    Bonding tiles, waterproofing and anti-humidity coatings, structures and masonry exposed or underground provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Bonding small vitreous tiles for swimming pools. Bonding tiles on Osmocem Flex or Osmocem D type osmotic coatings on terraces and balconies.
    Allowed supports
    Plasters
    Concrete
    Cement-based or lime-based mortars
    Tiles
    Floor screed
    Porous stone
    Preparation of supports
    Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface".
    Mode of use
    Mix the powder component (component A) with the hydrating solution (component B) with a drill at a low number of revolutions, pouring the powder progressively in the liquid, continue mixing until a homogeneous lump-free mixture is obtained. After mixing is completed wait a few minutes and stir again before proceeding with the application.
    Application methods
    Notched finishing trowel
    Tool cleaning
    Water
    Key features
    Max. recommended thickness
    Max. recommended thickness: 10 mm
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 0.5 mm
    Min. recommended thickness
    Min. recommended thickness: 2 mm
    Nonflammable
    Nonflammable
    Pot-life
    Pot-life: 50 min
    Shelf-life
    Shelf-life: 12 months
    Temperature of use
    Temperature of use: +5 / +35 ยฐC
    UV-resistant
    UV-resistant
    Technical specifications

    Compressive strength
    UNI EN 1015-11

    25 N/mmยฒ

    Flexural strength
    UNI EN 196/1

    7 N/mmยฒ

    Durability - Tensile adhesion after freeze-thaw cycles
    EN 12004

    1.5 N/mmยฒ

    Reaction to fire
    EN 12004

    CLASS F

    Execution of wall joints

    4-8 h

    0.3 mm

    Mixing ratio of the components
    A:B

    4.1:1

    Strain at break, characteristic value

    2.6 mm

    Density
    UNI EN 1015-6

    1750 g/l

    Complete hardening at 20ยฐC
    a 20ยฐC

    80 - 90 min

    Floor joint execution

    20 h

    Durability - Tensile adhesion after thermal aging
    EN 12004

    2.5 N/mmยฒ

    Capillary absorption
    UNI EN 1015-18

    < 0.3 kgโ€ขh^0.5/mยฒ

    Open time
    a 30'

    โ‰ฅ 0.5 MPa

    Walkability

    20 h

    Commissioning

    3-5 day

    Durability - Tensile adhesion after immersion in water
    EN 12004

    1.3 N/mmยฒ

    Bonding force
    UNI EN 1542

    2.8 N/mmยฒ

    Tile registration time

    40 min


    EN 12004

    2.3 N/mmยฒ
    Consumption
    Use from 5 to 6 kg/mยฒ of Osmokoll depending on the type of support and the type of material to be bonded.
    Available colors
    Gray
    Packaging and dimensions
    Bag 25 kg [A]
    Plastic can 6 kg [B]
    Kit: 1 Bag 25 kg [A] + 1 Plastic can 6 kg [B]
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    It is always essential to carry out preliminary tests to verify the appropriateness of the product, depending on specific requirements.

    Do not apply in case of direct exposure to sunlight and cure the protection and moist hardening.
    Do not apply on little or non-porous substrates or previously coated with water-repellent treatments in general, if not after appropriate roughening by bush hammers, sanders and equipment suitable for preparatory treatments of substrates, or after appropriate treatment with suitable polymeric primers.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Request product info

      By submitting I agree to the privacy notice

      Copyright ยฉ 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross