Protech Sil Filler
The peculiar composition of Protech Sil Filler provides the performance of a real microporous filter, impervious to rain, it is exceptionally permeable to vapour: the "Sd" value is about ten times lower than that characteristic of normal acrylic paints. The product can then be applied on mineral media as well as on media treated with emulsion-based paints, providing a physical adhesion that is extremely permeable to vapour. Thanks to the physical structure of the binder, the silicone coating made with Protech Sil Filler, particularly resistant to light and weathering is even resistant to microorganisms.
Fields of application
Renovation of vertical external façades characterised by significant presences of cracklings from shrinkage, also of width up to 1 mm. Regularisation of patches, of areas with different particle sizes and absorption. Particularly suitable for anti-cracking reclamation in buildings subject to protection as "cultural heritage".
Allowed supports
Plasters
Cement-based or lime-based mortars
Drywall
Plaster (gypsum)
Fiber-cement
Preparation of supports
The support must be intact, dry and dust-free. Any biodeteriogenic settlements such as fungi, moulds, algae, lichens, etc. should be preliminarily tempered with specific products (CONSILEX ANTIMUFFA CLEANER and CONSILEX ANTIMUFFA). Where necessary it is necessary to provide suitable reinforcements with Sanastark. Static cracks exceeding 0.5 mm should be preliminarily filled with Fibrostuck.
Mode of use
Apply at least 2 coats of Protech Sil Filler on the surfaces to be treated (about 125-150 g/m² per coat).
It is recommended to "finish" the restoring treatment of the façade with the siloxane paint Protech Sil P.
Consumption
Apply from 0.35 to 0.60 kg of Protech Sil Filler per square metre of surface to be painted.
Available colors
White
Cartella colori Azichem - silossanici
Storage and conservation
Protect from freezing.
Warnings
Avoid application in the presence of rainfall and high humidity.
Any fouling of the product on adjacent surfaces must be removed with Nitro thinner.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
