Fields of application
Preliminary fixative for painting and coating with protective finishes and decorative systems with pigmented siloxanes. Protech Sil Fix can be applied on old and new plaster, cement, synthetic- and lime-based, on pre-existing mineral and synthetic paints, etc.
Allowed supports
Plasters
Concrete
Cement-based or lime-based mortars
Prefabricated concrete
Drywall
Plaster (gypsum)
Fiber-cement
Preparation of supports
The surfaces of application should be clean, free of any soiling, crumbling and non-adhering parts, or non-absorbent, dust, pre-existing paints, etc.
Mode of use
Apply the product with roller, brush or airless at low pressure, at about 120 g/m².
Application methods
Low pressure airless nebulizer
Brush
Paint roller
Sprayer
Technical specifications
Touch hardening at 20°C
a 20°C
4-6 h
Complete hardening at 20°C
a 20°C
10-12 h
Consumption
From 0.10 to 0.15 litres of Protech Sil Fix for each square metre of surface to be treated, based on the porosity of the support.
Packaging and dimensions
Plastic can 5 l
Plastic can 20 l
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
Keep away from open flames and sources of heat; use with protective gloves and goggles.
It is always essential to carry out preliminary tests to check the appropriateness of the product, depending on specific requirements.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
