Fields of application
Syntech Flexipur is ideal for creating the surface protection of both new and existing reinforced concrete structures; The final protective treatment of coatings for commercial activities, offices, hospitals and public environments in general; It can be used for UV protection of solvent-free polymeric elastic sheaths.
Allowed supports
Concrete
Prefabricated concrete
Wood
Steel
Bricks
Porous stone
Mode of use
Mix the two components in their respective packaging. Then pour component B into the container of component A. Mix everything for 3-4 minutes using a low-speed mechanical stirrer until a homogeneous and lump-free mixture is obtained. Mix the dough again for a few minutes to mix the mixture. Apply the product within 60 minutes.
Syntech Flexipur can be applied by roller or spray (airless). With manual roller application it is advisable to foresee 2 successive coats, spaced out by a minimum time of 5 hours (20 ° C and 65% R.H.). In the case of spray application (airless) it is possible to apply the recommended thickness of 200-300 dry microns in a single coat. The product must be applied at temperatures between +10 and + 35 ° C; optimal density and workability are obtained at a temperature of + 20 ° C.
Tool cleaning
Syntech Diluente Poliuretanico
Technical specifications
Resistance to severe chemical attacks
EN 13529
See Table
Capillary absorption
EN 1062-3
w < 0.1
Permeability to CO2
EN 1062-6
Sd > 50 m
Viscosity
Ford ASTM D 1200
25 ± 5 s
Impact resistance
EN ISO 6272-1
> 4 N/m
Reaction to fire
EN 13501-1
Bfl S1
Concrete adhesion (direct traction)
UNI EN 1542
≥ 5.0 MPa
Longitudinal elongation at break
EN 12311-2
> 400 %
Permeability to water vapor
EN ISO 7783-1
Sd < 50 m
Taber abrasion resistance
expressed as weight loss in
grams (H22 wheel - 1000 g - 1000 rpm)
EN ISO 5470-1
< 3000 mg
Time before second coat at 20°C
max 24 h
Consumption
Approximately 80-120 g / m2 of Syntech Flexipur for each coat (apply two coats).
Available colors
Cartella colori RAL classic
Packaging and dimensions
Can 6.7 kg [A]
Can 3.3 kg [B]
Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
