Home
/
Products
/
Waterproofers
/
Polyurea
/
Syntech Poliurea Spray-FR

Syntech Poliurea Spray-FR

Self-extinguishing pure polyurea for continuous coatings

Syntech Polyurea Spray-FR is a 100% solid polyurea, it does not contain VOC and can only be applied by spraying using suitable bi-mixer machines that have flow and temperature control and are capable of reaching pressures greater than 180 bar. Added with additives that improve the self-extinguishing properties. It is of the aromatic type and belongs to the Euroclass B s2 d0 according to the EN 13501-1:2005 standard for concrete and fiber cement and in the RAL 7040 colour. It is characterized by a high degree of elongation and this allows it to be used as a very high performance waterproofing, therefore suitable for tanks, tubs and hydraulic works in general. The great adhesion capacity on different supports, after using primer, allows its use on new or existing structures.

Components

Two-components

Appearance

Liquid

Customs code

Request product info

Obtained Certifications and Regulations

Lines of belonging

Thematic site

Features and benefits

Where it is used

How to use

Technical data

Warnings and precautions

Syntech Poliurea Spray-FR

The pure polyurea Syntech Poliurea Spray-FR guarantees excellent adhesion to the substrate, giving rise to a continuous membrane, without any joints and extremely resistant:

environmentally friendly, VOC FREE
extremely resistant to atmospheric agents
excellent fire resistance properties
no weight loss
Excellent resistance to puncture, impact and abrasion
Constant performance at temperatures - 30 °C / +130 °C
High static and dynamic crack-bridging capacity
Gel time 10 sec
It does not weigh down the structure
It adapts to any geometric shape

Fields of application

SYNTECH POLYUREA SPRAY - FR is particularly used as a waterproofing on concrete or as a protective coating for water containment tanks, primary containment, flooring, purification plants, EPS coating, coating and protection of sheet metal, roofs, wooden balconies and canopies, tanks and swimming pools.

Allowed supports

Preparation of supports

All surfaces must be free of contaminants and humidity less than 3%; it must offer a mechanical grip on a solid and non-yielding substrate. Where necessary, we recommend preparation using shot peening, bush hammering, sanding or hydrowashing. Consult personnel for correct preparation of the substrate. It is recommended to use primers from the SYNTECH POLIUREA PRIMER range and contact Azichem technical staff for clarification on the most suitable type to use.

Mode of use

SYNTECH POLIUREA SPRAY - FR pure polyurea requires a bimixer system capable of producing pressure over 180 bar and temperatures over 65 C°. Contact Azichem technical staff for clarification on the best gun to use and on the details relating to the air system.

Application methods

Tool cleaning

Key features

Dosage: 2.9 kg/m²

Mixing ratio: 1:1 (in volume) _

Shelf-life: 6 months

Temperature of use: -10 / +70 °C

Use wearing protective glasses

Use wearing protective gloves

Technical specifications

Concrete adhesion (cutting test)
UNI EN 1542:1999

> 1.5 MPa

Complete hardening at 20°C

> 24 h

Resistance to tearing
UNI ISO 34-1:2010

70 - 80 kN/m

Hardness
UNI EN ISO 868:2005

93 +/-5

Walkability

> 15 min

Gel time

8 s

Impact resistance
EN ISO 6272-1:2013

Classe 1

Reaction to fire
EN 13501-1:2005

B s2 d0

Access for traffic light

> 9 h

Longitudinal elongation at break
ISO 527-1:2012

270 %

Permeability to water vapor
EN 1062-3:2008

0.1

Working temperature

-30 / +130 °C

Adhesion by direct traction
UNI EN ISO 4624:2006

> 0.8 N/mm²

Resistance to abrasion
UNI EN ISO 5470-1:2001

< 100 mg

Consumption

Approximately 2.9 kg of SYNTECH POLIUREA SPRAY - FR for each square meter of surface to be covered.

Available colors

Packaging and dimensions

Storage and conservation

Protect from freezing.

Warnings

See the safety data sheet to view complete data. Protect the materials from humidity and water.

The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.