Syntech Tarpox
The characteristics of SYNTECH TARPOX make it a product with high elasticity and flexibility, with excellent adhesion values โโto concrete and steel, with high resistance to freeze-thaw cycles, with high impermeability to both water and hydrocarbons and oils, with high resistance to abrasion and chemical aggression.
Fields of application
SYNTECH TARPOX is used for protective waterproofing of tanks, purifiers, sewer pipes, structures that are submerged or subject to shoreline in fresh and sea water, floats, oil pipelines, penstocks.
Preparation of supports
The application surfaces must be suitably prepared and adequately resistant: free from dust, grease, dirt, friable and / or inconsistent parts, free from surface dampness. A preliminary shot-peening or milling of the adhesion surfaces may be advisable. Any obvious holes, cracks, cracks or irregularities must be restored with Syntech AS 21.
Mode of use
Mix the components each in their own container before use. Put component B and component A into a suitable container and mix at low speed with a mixer for at least 5-6 minutes until a homogeneous mixture is obtained, free of lumps and air bubbles. Do not take partial quantities from the packages to avoid any errors in the mixing ratio which would cause incorrect hardening.
After applying SYNTECHPRIMER EP-W, and in any case no later than 24 hours, apply SYNTECH TARPOX by roller, brush or spray, pure or diluted. To obtain good protection, the minimum thickness applied must never be less than 150 ฮผm, while the maximum thickness does not normally exceed 600 ฮผm.
Technical specifications
Taber abrasion resistance
expressed as weight loss in
grams (H22 wheel - 1000 g - 1000 rpm)
EN ISO 5470 - 1
150 mg
Hardness
Shore D EN ISO 868
38 ยฑ 2
Reaction to fire
EN 13501-1
Euroclasse F
Permeability to CO2
EN 1062-6
SD > 550 m
Viscosity
Brookfield ASTM D 2196
5.000 ยฑ 1.500 mPas
Permeability to water vapor
EN ISO 7783-1
SD = 6.4 m
Complete hardening at 20ยฐC
7 day
Concrete adhesion (direct traction)
UNI EN 1542
โฅ 3 N/mmยฒ
Time before second coat at 20ยฐC
16 h
Resistance to severe chemical attacks
EN 13529
Classe I
Consumption
From 150 to 350 g of SYNTECH TARPOX per coat for each square meter of surface to be coated, depending on the type of substrate.
Packaging and dimensions
Pail 8.3 kg [A]
Pail 1.7 kg [B]
Kit: 1 Pail 8.3 kg [A] + 1 Pail 1.7 kg [B]
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
