Fields of application
Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements.
Allowed supports
Bricks
Tuff
Mixed walls (bricks and stones)
Brickworks
Stone walls
Preparation of supports
The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface".
In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55.
Mode of use
Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4).
Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces.
Application methods
Brick trowel
Finishing trowel
Plastering machine
Straight edge
Technical specifications
Compressive strength
EN 12190
> 20 N/mmยฒ
Flexural strength
EN 12190
> 4 N/mmยฒ
Breathability
UNI EN 1015-19
11 ฮผ
Content of pre-consumer recycled material
UNI EN ISO 14021:2021
2.17 %
Content of post-consumer recycled material
UNI EN ISO 14021:2021
0.15 %
By-product recycled material content
UNI EN ISO 14021:2021
1.10 %
Total recycled content
UNI EN ISO 14021:2021
3.42 %
Capillary absorption
UNI EN 1015-18
0.14 kgโขh^0.5/mยฒ
Bonding force
UNI EN 1015-12
> 0.9 N/mmยฒ
Static elastic modulus
EN 13412
11700 N/mmยฒ
Reaction to fire
EN 13501-1
A1
Thermal conductivity
UNI EN 12667
0.30 W/mK
Consumption
Approximately 15 kg/mยฒ of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre).
Packaging and dimensions
Bag 25 kg
Pallet: 50 x (Bag 25 kg)
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
