Fields of application
Anchoring with precision alignment of industrial machinery. Anchoring of metal elements. Localised restoration of industrial flooring subject to high static and dynamic loads. Reconstruction of joints in industrial flooring. Levelling of screeds and flooring. Localised regeneration of wooden beam heads. Reconstruction of construction artefacts in general.
Allowed supports
Concrete
Wood
Floor screed
Steel
Preparation of supports
The surfaces on which it is to be applied are to be clean, dry, free from dust, dirt, and the like, as well as being adequately consistent. Be sure to remove any deteriorated parts of the surface.
Mode of use
Combine component B with component A, being sure to add all of the material contained in the packages then thoroughly mixing with a low-speed mixer until a perfectly homogeneous mixture is obtained. Add the required amount of “charger” (component C), continuing to mix until reaching the original homogeneity of the adhesive system.
As regards the anchoring of machinery, before positioning the machine, remove any deteriorated concrete and loose parts from the foundation surface, including any parts saturated with oil or grease. Check that air vent holes have been made on the base plate of the machine. During the first 10 hours following installation, ensure the substrate is not subject to vibrations from other machinery.
Regarding the reconstruction of the wooden beam heads, apply in the manner dictated by the type of operation, subject to:
- beam shoring
- insertion of reinforcing bars
- the construction of suitable formwork
- applying (pouring) cement.
Do not apply to wet and/or powdery media. Use the product immediately after mixing.
Application methods
Brick trowel
Pour out
Spatula
Technical specifications
Static elastic modulus
UNI EN 13412
21000 N/mm²
Skid resistance
UNI EN 13036-4
CLASS I
Capillary absorption
UNI EN 13057
0.01
Compressive strength after 28 days
UNI EN 12190
80 N/mm²
Chloride content
UNI EN 1015-17
0.01 %
Touch hardening at 20°C
a 20°C
2 - 4 h
Consumption
Approximately 1.55 kg of Epomalta LC is required for each cubic decimetre of volume to be reconstructed (about 1550 kg per cubic metre).
Packaging and dimensions
Can 1 kg [A]
Can 0.5 kg [B]
Pail 7.5 kg [C]
Kit: 1 Can 1 kg [A] + 1 Can 0.5 kg [B] + 1 Pail 7.5 kg [C]
Storage and conservation
Protect from freezing.
Warnings
The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
