Sanatex

Sanatex represents the low-thickness solution for the renovation of damaged walls and facades, both externally and internally. It allows for quick and effective recovery of funds even in the most difficult situations without inconvenience for tenants. Ideal for walls with static cracks. It contributes to the optimization of energy efficiency and the comfort of buildings thanks to its thermal insulation properties, breathability, resistance to mold and fungi and stability over time. Its use helps keep the home environment healthy. It reduces the energy dispersion of a standard non-insulated wall by up to 30% and increases the surface temperature in the presence of thermal bridges. Resistant to mold and fungi, thanks to its natural fungicidal characteristic.
Sanatex is the ideal material for rapid, economically advantageous and low environmental impact interventions.

The application surfaces must be clean, free of dirt, crumbly and loose parts, dust, etc. In the presence of mold, carry out a preventive removal and sanitization treatment with specific products such as Consilex Muffa Cleaner and Consilex Muffa Remover. A slight roughening of the surfaces is always necessary in order to obtain maximum adhesion values to the support of the Sanakoll smoothing adhesive, premixed used to glue the membrane to the support and cover it by smoothing.

The Sanatex membrane has been specially developed for simple and quick installation even in the presence of complex, non-planar surfaces and with shape constraints such as cornices, windowsills or other facade elements that must be kept intact. The membrane can be cut to size with simple construction scissors. The membrane is glued with the special Sanakoll glue/smoothing compound, spread with a 5 mm notched trowel on a support prepared as previously described. Adhere the membrane to the Sanakoll adhesive with simple pressure, which can be facilitated by passing a plastic pressure roller. Wait 24-48 hours for the glue to dry, then smooth the membrane using Sanakoll glue/smoothing compound, spread in two coats to a total thickness of approximately 2 mm. The indicative consumption of Sanakoll is approximately 4 kg/m2 as an adhesive and approximately 2 kg/m2 as a smoothing compound. Finish the surfaces with breathable paints or plasters from our Protech and Sanageb lines.